Unique Design 1mL Saliva Collection Kits Viral Transport Medium Kit

Unique Design 1mL Saliva Collection Kits Viral Transport Medium Kit

Unique design hot sale extraction sample collection saliva test kits

Product introduction:

HCY Saliva Collection Kit is user-friendly designed for donor’s DNA/RNA sample self-collection at home, which is an all-in-one system for collection, stabilization, transportation, and storage of RNA from a saliva sample. This product collects saliva samples secreted from the oral cavity through the collection tube, and evenly mixes the collected saliva with the transport medium, ensuring the integrity of the DNA/RNA in the saliva sample.

Product advantages:

1. Non-invasive, painless, easy to handle. Ideal for children sample collection

2. Samples are non-infectious and can be shipped safely.

3. Self-collection, no need for a trip to a testing center.

4. Medical staff is not exposed to the risk of infection.

5. Unique funnel design prevents spillages or buffers flow back

Product Usage:

This product is suitable for collecting and storing human oral saliva samples at room temperature. The DNA in saliva samples can be obtained by nucleic acid extraction methods later.

Collection principle:

This product collects saliva samples secreted from the oral cavity through the collection tube, and evenly mixes the collected saliva with the saliva preservation solution, ensuring the integrity of the DNA in the saliva sample and its long-term storage at room temperature.

product instructions:

①. Relax your cheeks and knead gently for 30 seconds to produce saliva;

②. Gently spit about 2ml of saliva into the saliva collection funnel;

③. Pay attention to avoid excessive foam when collecting saliva (the upper foam is not included);

④. Open the DNA storage solution tube and unscrew the cap;

⑤ Pour the DNA preservation solution into the saliva collector, and confirm that the layered interface between the liquid in the sample collection and the upper foam reaches the scale line shown in 4ml;

⑥ Unscrew the collection funnel from the screw mouth of the saliva collection device, and remove the funnel (remember to dispose of the waste after use to avoid contact and pollution);

⑦. Tighten the cap of the tube on the sample collection tube, and mix the liquid in the tube upside down, so that the DNA preservation solution and the saliva sample are fully mixed to complete the sample collection work.

Product parameter:

1. The composition of the collection funnel, collection tube, and collection tube cap should be polypropylene material;

2. The preservation solution (transport medium) is sealed and leak-free;

3. Centrifuge tube and saliva collection port do not leak preservation solution (transport medium).

200 sets/ Carton

Precautions:

①. Do not eat, drink, smoke, or chew gum within 30 minutes before collecting saliva samples

② It takes 2 to 5 minutes for most people to collect saliva samples according to the above steps.

③. Before starting to collect saliva, please relax your cheeks and gently massage your cheeks with your fingers for 15-30 seconds to produce saliva.

④. Confirm that the outer packaging of the saliva sample collection tube is intact, and check the saliva storage tube to confirm that there is no leakage. Important note: Saliva collection fluid cannot be used!

⑤ Under room temperature storage conditions, saliva samples collected by this product can be stored stably for 1 month, and high-quality high-molecular-weight DNA fragments can be separated within the shelf life. Given the individual differences in the samples, the specific shelf life of different samples fluctuates

Storage conditions and validity period:

Storage conditions: room temperature (15-30℃)

Validity: 12 months

Sample requirements: Saliva samples collected must be free of debris and sputum.